P8Z68-V PRO/GEN3
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
Fix RTC function failed issue.
Improve system stability.
For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 11.2.0.1006 and BIOS to version 3603 before enabling Intel Smart Response Technology.
Update procedure for users needing Intel Smart Response Technology:
(1)Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2)Install version Intel Rapid Storage Technology driver to version 11.2.0.1006
(3)Reboot the system, and update BIOS to version 3603, then reboot.
(4)Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5)Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.
For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 11.5.0.1207 and BIOS to version 3603 before enabling Intel Smart Response Technology.
Update procedure for users needing Intel Smart Response Technology:
(1) Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2) Install version Intel Rapid Storage Technology driver to version 11.5.0.1207
(3) Reboot the system, and update BIOS to version 3603, then reboot.
(4) Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5) Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.
1.Improve Improve system stability.
2.Enhance compatibility with some USB devices.
3.Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
For proper operation, please ensure to update Intel Rapid Storage Technology driver to version 10.8.0.1003 and BIOS to version 3304 before enabling Intel Smart Response Technology.
Update procedure for users needing Intel Smart Response Technology:
(1) Enter OS, and ensure Intel Smart Response Technology has been turned off under Intel Rapid Storage Technology interface.
(2) Install version Intel Rapid Storage Technology driver to version 10.8.0.1003.
(3) Reboot the system, and update BIOS to version 3304, then reboot.
(4) Enter the BIOS setup screen, press F5 to load BIOS default, then change the Intel SATA Port to RAID mode.
(5) Boot into OS, and re-enable Intel Smart Response Technology under Intel Rapid Storage Technology.
1.Improve system stability.
2.Improve memory compatibility.
3.Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
* Enable support for Intel Next Gen 22nm Processor E1 stepping MP version CPU (available from BIOS 3012).
Note:
1. For complete Intel Next Gen 22nm Processor support, please update the driver of Intel MEI, Intel VGA and Lucid Virtu technology to below version.
Intel(R) Management Engine Interface V8.0.0.1262 for Windows XP/Vista/7 32bit & 64bit.(WHQL)
Intel(R) Graphics Accelerator Driver V8.15.10.2598 for Windows 7 32bit & 64bit.(WHQL)
Intel(R) Graphics Accelerator Driver V6.14.10.5398 for Windows XP 32bit & 64bit.(WHQL)
Lucid Virtu Software V1.2.112.20176 for Windows 7 32bit & 64bit
2. Do not shut down or reset the system to prevent system boot up failure while BIOS is updating.
1. Improve system stability
2. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
First release Bios.